DIY Thankful/Blessed Box

This project is perfect to brighten up your home! Customize it with any text, and dress it up with different floral arrangements for any time of year!

• Butane Torch
• Burn Stencils®
• Spray Lacquer or Poly
• Cordless Drill
• 1/4" Drill Bit
• Phillips Screw Bit

Materials Required:

• (4) 16oz Mason jars 
• (14) 1-1/4" Wood Screws 
• Faux flowers/stems/branches 
• Boards
• A. 1" x 4" x 14" Board
• B. (2) 1" x 6" x 14" Board
• C. (2) 1" x 6" x 5" Board

Instructions:

• Using the 1/4" Drill Bit, pre-drill the holes on each board, as shown below

• Drill the (B) boards to the (A) board
• Drill the (C) boards to the (B) & (A) boards
• Using your Thankful/Blessed BurnStencil, carefully burn one word on one side of each (B) 1" x 6" x 14" Board with your butane torch. You can hold down the stencil while burning with a screwdriver, to keep it in place
• Spray finish the boards to protect the burned text from smearing, and let them dry overnight
• Place your Mason Jars inside the opening of the box, and arrange the flowers/stems/etc. to your liking. These can easily be replaced for different seasons to match your decor